This is the second part of the article about import and export data in XML format.

In the first post we have shown how to import and export data in XML format using Axd classes and it was mostly oriented to X++ developers.

In this post, we will use data generated in the first post (AxBc and Axd classes) and will explain how to import and export data in XML format, but using Application Integration Framework (AIF) features and batch framework. This article is mostly oriented to end-users.

Setup part:

Setup part consists of two parts: AIF setup and Batch framework setup.

AIF setup:

Before starting AIF setup, please import the xpo file with all required objects from here. Even if you have generated these objects before as a part of the first article, you still need to import it because some objects were slightly modified in order to implement Send functionality which will be used in this article.

The path to the AIF setup forms is: Basic > Setup > Application Integration Framework.

Blog Image

Figure 0. AIF setup forms location.

1) Open Local endpoints form and create a new local endpoint for the company where you want to import data to or to export data from. In our case, it is company DAT.

Blog Image

Figure 1. Local endpoints form

2) Open Transport adapters form and create a new transport adapter for the file system. Set Direction field to “Receive or Send” and select Active checkbox.

Blog Image

Figure 2. Transport adapters form

3) Open Channels form and create two new channels – Outbound and Inbound. The channes simply specify where the files should be taken from or put in.

At first, create an outbound channel and then create an inbound one and assign the outbound channel to it. For the outbound channel, create a folder C:\AIF\Outbound and for the inbound one – C:\AIF\Inbound.

Blog Image

Figure 3. 1. A new outbound channel

Blog Image

Figure 3.2. A new inbound channel with the assigned to it outbound one.

4) Open Actions form and click “Scan and register” button in order to find new documents and generate new actions for them. In our case, the system will be looking for AxdMyTable document and will be generating Create, CreateList, FindEntityKeyList, FindList, Read and ReadList actions for that document. For all these actions, we need to manually select “Enabled” checkbox.

Blog Image

Figure 4.1. Actions form before new actions were generated.

Blog Image

Figure 4.2. Actions form – searching AOT for new documents

Blog ImageFigure 4.3. Actions form – new actions CreateMyTable and CreateListMyTable for AxdMyTable document.

Blog Image

Figure 4.4. Actions form – new actions FindEntityKeyListMyTable and FindListMyTable for AxdMyTable document.

Blog ImageFigure 4.5. Actions form – new actions ReadMyTable and ReadListMyTable for AxdMyTable document.

5) Open Endpoints form and create a new endpoint. The endpoint is used to define rules for import and export of documents (where to export, who can export, which table fields to export or to import, etc.).

Blog Image

Figure 5.1. Endpoints form, Overview tab

Blog Image

Figure 5.2. Endpoints form, General tab

Blog Image

Figure 5.3. Endpoints form, Constraints tab

Blog Image

Figure 5.4. Endpoints form, Users tab

6) In the Endpoints form, click Action policies button. In the Endpoint Action Policies form, you need to add all 6 actions generated in the Actions form in order to be able to apply these actions for the AxdMyTable document. For each action, you need to set the Status field to “Enabled” and Logging Mode to “Log All”.

Blog Image

Figure 6.1. Endpoint Action Policies form – action selection

Blog Image

Figure 6.2. Endpoint Action Policies form – all actions added

7) The last step of the AIF setup part is to enable fields that can be imported or exported for each action. For that, select an action and click “Data policies” button and enable following four fields: DocPurpose, MyFieldInt, MyFieldStr, Sender as shown on the picture below. Repeat it for each action.

Blog Image

Figure 7. Data policies selection for createListMyTable action.

Batch framework setup:

8) The path to the Batch setup forms is: Basic > Setup > Application Integration Framework.

Blog Image

Figure 8. Batch setup forms location.

9) Open Batch groups form and create a new batch group.

Blog Image

Figure 9. Batch group form with a new batch group ‘AIF’.

10) Open Journal types form and create a new batch journal type. On the General tab, add four following classes that will be run by batch framework in order to import or export data: AifGatewayReceiveService, AifInboundProcessingService, AifOutboundProcessingService, AifGatewaySendService. The sequence in which you add them is not important at this point.

Blog Image

Figure 10.1. Batch journal type form.

Blog Image

Figure 10.2. AIF RunBaseBatch based classes added to the batch journal type.

11) Open Journal names form and create a new journal name. Give it a name ‘AIF’ and in the Journal type field, select ‘AIF’ journal type created in the previous step.

Blog Image

Figure 11. Batch journal name form.

12) In the Batch journal name form, click Jobs button. In the Batch journal line form, click Ctrl+N and select a class name from the lookup form. Repeat it for each class name. After all four classes are added, sort them using Up and Down buttons so that they are listed in the following order:

1. AifGatewayReceiveService

2. AifInboundProcessingService

3. AifOutboundProcessingService

4. AifGatewaySendService

Blog Image

Figure 12.1. Batch journal line form – class name selection.

Blog Image

Figure 12.2. Batch journal line form – classes are in the correct positions.

That’s it with the setup part.

Let’s go to execution phase.

Execution part:

1) Import from XML file.

1.1) Copy the createListMyTable.xml file to the C:\AIF\Inbound folder.

1.2) Go to Basic > Periodic > Batch and open Batch journal execution form. Specify a journal name, a batch group and recurrence if necessary, and select the batch processing checkbox and click OK button.

Blog Image

Figure 1.1. Batch execution forms

Blog Image

Figure 1.2. Batch journal execution form – the journal name selection

Blog Image

Figure 1.3. Batch journal execution form – the batch processing, the batch group and the recurrence selection.

1.3) Open Processing form, select ‘AIF’ batch group and click OK.

Blog Image

Figure 1.4. Batch processing form

Now the createListMyTable.xml file should be imported into MyTable table and if you open the form MyTable form (it is a part of the xpo project imported in the beginning of AIF setup) you should be able to see two records:

Blog Image

Figure 1.5. Two records imported from the XML file

2) Export into XML file

2.1) Open MyTable form (select the form in AOT and click Open icon), select the first record and click Send electronically button. Now the job is added to the gateway queue and as soon as you run the batch jobs this document will be exported.

2.2) Repeat the steps 1.2 and 1.3 from the Import part. This will run the batch jobs.

2.3) Now the first record from the MyTable table should have been exported into XML file and you should be able to find it in C:\AIF\Outbound folder.

Blog Image

Figure 1.6. The exported 20083624_213604_2113008_00001.xml file.

That’s all.

A hint:

If you have a problem and don’t know why data was not imported or exported, look at the Basic > Periodic > Application Integration Framework > Exceptions form. This form has a log of all errors occurred during AIF processes and an explanation why they occurred.

Good luck!


More info regarding AIF you can find in MSDN: